|
Series30R Reflectorless Total
Stations
|
| |
SET330R
|
SET530R
|
SET630R
|
| Telescope
Fully
transmitting, Coaxial sighting and distance measuring optics. |
Magnification
|
30x |
30x |
26x |
| Resolving power |
3" |
3" |
3.5" |
| Field of view |
1°30"
(26m/1,000m) |
1°30"
(26m/1,000m) |
1°30"
(26m/1,000m) |
| Minimum focus |
1.3m (4.3ft) |
1.3m (4.3ft)
|
1.3m (4.3ft)
|
| Angle measurement
Photoelectrical absolute rotary encoder scanning. Both circles adopt
diametrical detection. |
| Unit
H&V |
Degree / Gon
/ Mil, selectable |
| Display resolutions
H&V |
1 / 5",
0.2mgon/1mgon, 0.005 mil, selectable |
| Accuracy (ISO12857-2
1997)
H&V |
3" (1mgon) |
5" (1.5mgon) |
6" (1.9mgon) |
| Measurement
mode |
H:Clockwise
/ Counterclockwise, 0 set, Hold, angle setting, repetition
V:Zenith 0°, Horizontal 0° ±90°, slope in % |
| Automatic dual-axis-compensator |
Range: ±3'
(±55mgon), "out-of-range " warning display provided |
| Distance
measurement Modulated near infrared LASER,
Laser diode, Coaxial EDM transmitting and receiving optics (IEC Class
2, FDA Class ll LASER) |
| Maximum measuring range |
A: Average conditions: slight
haze, visibility about 20km (12miles), sunny periods, weak scintillation.
B: Good conditions: no haze, visibility about 40km (25miles), overcast,
no scintillation. |
| Reflectorless *1A |
100m (320ft.) or more |
| With reflective sheet A |
500m (1,640
ft.) |
| With one AP01 prism G |
5,000m (16,000
ft.) |
4,00m (13,000
ft.) |
| Unit |
Meters / Feet / Inch, selectable |
| Display resolution |
0.001m (0.01 ft. / 1/8 inch) |
| Accuracy |
|
| Reflectorless *1 |
±(3 + 2ppm x D)mm |
| With reflective sheet |
±(3
+ 2ppm x D)mm |
| With AP prism |
±(2 + 2ppm x D)mm |
| Measuring time |
Every 1.3s (initial meas.
2.6 s) |
| Measurement mode |
Fine meas.
(single/repeat/average) / Tracking |
| Laser |
Wavelength: 635 - 690 nm,
Max. output:0.99mW |
| Data storage and transfer |
| Data storage |
|
| Internal memory |
About 10,000 points |
| Memory card unit*2 |
Optional |
- |
| Scale factor setting |
0.5 to2.0 |
| Interface |
Asynchronous
serial, RS-232C compatible, baud rate : 1,200 to 38,400 bps |
| Printer output |
Centronics compatible (w/
optional DOC46 printer cable) |
| General |
| Laser-pointer function |
ON (automatic
off 5 minutes after operation) / OFF, selectable |
| Display type |
Alphanumeric/graphic dot
matrix LCD (192x80 dots) |
| Keyboard (15keys) |
On both faces |
On one face |
| Wireless keyboard |
Optional |
- |
| Sensitivity of levels |
|
| Plate level |
30" / 2mm |
40" / 2mm |
| Circular level |
10' / 2mm |
| Graphic LCD level |
3' outer circle |
|
|
| Optical plummet |
Image: Erect, Magnification:
3x, Minimum focus: 0.3m (0.98 ft.) |
| Water and dust resistance |
Conformity
to class IP66 (IEC60529) |
| Operating temperature |
-20°C
to +50°C C (-4°F to +122° F) |
| Tilting / Trunnion axis height |
236 mm (9.3
in.) from tribrach bottom, 193 mm (7.6 in.) from tribrach dish. |
| Size with handle and battery |
W 165xD
170x H 341 mm (W 6.5 x D 6.7 x H 13.5 in.) |
| Weight with handle and battery |
5.3kg (11.7lb.) |
| Power supply
Operating voltage: 7.2 V DC |
| BDC46A detachable battery |
Li-lon rechargeable
batter |
| Continuous use*3 |
About 5 hours (About 600points) |
| Recharging time |
Less than 2 hours with CDC61/62/64 |
| Battery level display |
4 steps
with warning message |
| Automatic power cut-off |
30 / 15
/ 10 / 5 minutes after operation / OFF, selectable |
| Resume function |
ON / OFF
selectable (backed up for about 1 week) |
